Hop-up can alternatively be used with two larger setting screws at the cost of quick-change keeping hop setting ability. Hop up setting is done by two screws on top of the rifle, through the receiver, with the provided key, without removing the barrel. The two-way CNC aluminium hop-up unit, directly attached to the quick-change barrel assembly, is allowing barrel switch in seconds while keeping your hop up setting. Inner barrel (6.05 x 578 mm, brass) and hop-up rubber (silicone 60) are of AEG type. Proper timing of the muzzle brake is compulsory when used with QD DTSS suppressor replica. 300 Mock Suppressor for SRS-A1 Silverback Airsoft Desert Tech QD SRS. Outer barrel (CNC, aeronautical grade aluminium) is very deeply fluted and threaded (M14x1 CCW thread). Silverback Airsoft SRS Suppressor: Silverback Airsoft Desert Tech QD SRS. The piston sear height can be adjusted by moving the trigger box forward or backward. The trigger housing is made of fiber glass reinforced Nylon. The piston sear is made of steel, and the aluminium trigger is adjustable in preload. Heavier BBs have more mass so theres more energy to be stored when traveling hence. Shorter barrels can still joule creep but theres not as much time for the BB to gain traction if you will. The bolt dust cover is perforated, and the red piston is acting as a priming indicator. With a longer barrel the energy of the air volume pushing BB forward has more time to transfer that energy and ramp it up. The spring guide is made of fiber glass reinforced Nylon, its equipped with 2 dampening orings and a thrust bearing. The piston has an aeronautical grade aluminium body and head, a steel piston end, and a 70 synthetic rubber piston cup. The cylinder is made of stainless steel (23.8 mm bore), and the monolithic bolt handle is made of steel, equipped with M8 bolt knob. Stock spring type and muzzle energy may differ from one country to another, please check directly with your retailer. This bolt can accept any APS 13 mm springs. SRS pull bolt air displacement is 41 cc, the second largest volume for bolt action on the market after our HTI. Top rail is detachable, allowing use of multiple optional alternatives, including M2 type rails. SRS A2 receiver is compatible with the replica of the Desert Tech monopod (patented). SRS A2 receiver features a stainless-steel attachment point for tripod (1/4-20 UNC thread). The handguard (CNC, aeronautical grade aluminium) is using MLOK attachment system, and include 4 QD points. Each receiver has a unique engraved serial number. SRS-A2 receivers are highly lightened, participating actively to the mass reduction. The SRS monolithic receiver, made of aeronautical grade aluminium, by CNC, features the new patented barrel mount by Desert Tech, that more uniformly clamps onto the barrel and reduces peak stress points. The Silverback SRS-A2 22 is our licensed version of the Desert Tech Scout Recon Stealth A2 bullpup sniper rifle, latest model of the SRS line.
0 Comments
Leave a Reply. |